ProductsFour Post Lifts

• Model: PP-8HI
• 8,000 lb. Capacity
• Free Standing/Portable Design
• Extra Tall
• Diamond Plated Runways
• Single-Point Lock Release
• Lock Ladder Design
• Double Lock Safety System
• Caster Kit with Polyurethane Wheels Included
• Steel Approach Ramps Included
• Steel Jack Tray Included
• 4 Plastic Drip Trays Included
• 4 Wheel Stops Included
• 2 Rubber Wheel Chocks Included
• Perfect For Storing or Working on Vehicles
• 110-Volt Electric Operation (30-AMP BREAKER REQUIRED)
• Shipping Weight 1,850 lbs.
• 3 yr Structural – 2 yr Hydraulic Warranty – Parts Only 

The NorthStar Garage PP-8HI is a true 8,000 lbs. four-post lift and is one of our most popular hobbyist lifts. This lift incorporates many of the great features of both the NorthStar Garage PP-8HI and the NorthStar Garage PP-9.

Many of our customers drive an SUV or pickup truck and wanted a storage lift that would “go higher” to allow them to park their taller vehicles under the elevated platform. Many of our competitors sell “taller” lifts. However, their “taller” lifts also have longer runways. Our customers requested that we make a lift which lifts higher, but without the extra length (longer runways take up valuable garage space). Most customers want to store a car on top and park a SUV or pickup truck below. The NorthStar Garage PP-8HI has been engineered to provide 79″ of clearance UNDER the bottom of the raised runway. If you need the extra lifting height of the NorthStar Garage PP-9, but do not need the extra width and runway length provided by that lift, then the NorthStar Garage PP-8HI is the perfect choice.

NorthStar Garage PP-8HI series of 4-post lifts (8,000 lb. capacity) are designed and built for use by homeowners or restoration shops. These lifts are not designed for use in commercial repair shops where they would be raised and lowered several times per day. If you have questions about which lift would work best in your application, please contact a salesperson.

The NorthStar Garage PP-8HI includes free plastic drip trays, a free steel jack tray, and a free caster kit with polyurethane wheels. The caster kit can be installed or removed in just a matter of minutes making the lift portable and allowing it to move between bays or even outside.

Many customers who purchased this lift also purchased the NorthStar RJ-35

• Capacity 8,000 Lb.
• Lifting Height to Top of Runway 84 1/4" (7 1/4")
• Clearance Under Runways 79" (6 7")
• Height of Columns 98 1/2" (8 2 1/2")
• Overall Width (Without Motor) 104 1/2" (8 8 1/2")
• Overall Width (With Motor) 115" (9 7")
• Overall Length with Approach Ramp 206 3/4" (17 2 3/4")
• Approach Ramp 37" (3 1")
• Runway Width 21 1/4" (w/ Rails) or 18 3/4" (Driving Surface)
• Runway Length 165 3/4" (13 9 3/4")
• Runway Thickness 4 1/2"
• Width Between Runways 37" (3 1")
• Width Between Runway Rails 31 1/2" (2 7 1/2")
• Outside Runway to Outside Runway74 5/8" (6 2 5/8")
• Clearance Between Columns 94 1/2" (7 10 1/2")
• Length Between Columns 157 1/2" (13 1 1/2")
• Maximum Wheelbase 153 1/2" (12 9 1/2")
• Drive Thru Clearance (Outside of Tire to Outside of Tire) 80 1/2" (6 8 1/2")
• Motor/Electrical Requirement 110-Volt, 30-AMP BREAKER REQUIRED
• Shipping Weight 1,850 lb.